Surface Bottles Sep 2016 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 112.2 20.8 1.92 3.838 5.21 0.248 <LD <LD <LD <LD <LD <LD
02 35.4 4.1 1.89 0.576 0.83 0.140 <LD <LD <LD 0.012 0.033 <LD
03A 49.9 10.3 DNQ 0.121 <LD 0.189 <LD <LD <LD <LD 0.021 <LD
03C 54.0 10.7 0.33 0.190 <LD 0.205 <LD <LD <LD <LD 0.045 <LD
05 80.7 12.4 0.74 0.400 0.55 0.188 <LD <LD <LD <LD 0.042 <LD
05A 43.4 6.2 0.46 0.201 DNQ 0.110 <LD <LD <LD <LD 0.026 <LD
06 106.2 32.0 0.86 6.132 11.72 0.266 <LD <LD <LD <LD <LD <LD
07 61.8 13.0 DNQ 0.284 <LD 0.192 <LD <LD <LD <LD 0.014 <LD
08A 54.8 10.7 DNQ 0.188 <LD 0.225 <LD <LD <LD <LD 0.018 <LD
09A 37.3 8.0 DNQ 0.073 <LD 0.144 <LD <LD <LD <LD 0.013 <LD
10A 44.0 9.5 0.23 0.169 <LD 0.180 <LD <LD <LD <LD 0.016 <LD
11 53.8 9.4 0.62 0.447 <LD 0.222 <LD <LD <LD <LD 0.017 <LD
13A 37.1 9.3 0.29 0.327 <LD 0.161 <LD <LD <LD <LD 0.049 <LD
14A 33.4 8.1 0.60 0.856 <LD 0.170 <LD <LD <LD <LD 0.076 <LD
15 35.4 7.5 0.30 0.090 DNQ 0.099 <LD <LD <LD <LD <LD <LD
16 131.5 30.7 0.87 4.004 8.58 0.391 <LD <LD <LD <LD <LD <LD
16A 99.3 2.8 <LD 2.556 <LD 0.283 <LD <LD <LD <LD <LD <LD
17 28.5 7.8 DNQ 0.220 <LD 0.098 <LD <LD <LD <LD <LD <LD
19 64.8 13.7 0.58 0.411 <LD 0.230 <LD <LD <LD <LD 0.013 <LD
22 48.0 11.8 0.34 0.179 <LD 0.191 <LD <LD <LD <LD 0.022 <LD
23 86.6 16.6 DNQ 0.122 <LD 0.340 <LD <LD <LD <LD 0.032 <LD
25 56.4 10.9 0.47 0.317 <LD 0.202 <LD <LD <LD <LD <LD <LD
Avg: 61.6 12.1 0.70 0.986 5.38 0.203 0.012 0.029

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 864 14.34 0.55 132.31 0.571 32.87 <LD 580.31
02 206 96.47 0.38 110.00 1.237 1.15 1.46 10.93
03A 331 108.94 0.50 166.22 0.079 2.92 <LD 48.72
03C 392 115.39 0.40 189.51 0.116 5.77 1.49 34.29
05 392 116.46 0.54 131.89 0.090 1.94 1.40 164.12
05A 131 127.86 0.40 4.48 0.061 1.49 1.38 17.96
06 867 acidic[3] 1.16 63.69 0.079 1.47 1.39 676.43
07 347 127.86 0.43 156.50 0.065 0.95 <LD 52.95
08A 323 171.29 0.60 110.76 0.068 1.60 1.44 23.15
09A 175 116.89 0.56 25.46 0.046 3.01 1.52 28.29
10A 277 133.23 0.43 92.88 0.075 1.55 1.39 24.29
11 273 150.65 0.47 72.68 0.057 3.18 <LD 18.77
13A 279 98.83 0.44 119.86 0.069 1.16 <LD 21.75
14A 150 91.95 0.40 32.32 0.034 1.20 <LD 26.26
15 150 82.06 0.38 3.03 0.041 1.45 <LD 50.00
16 849 acidic 1.30 144.81 0.074 3.71 <LD 658.34
16A 591 0.15 0.38 102.13 0.140 4.95 <LD 428.29
17 183 64.86 0.37 71.07 0.043 6.00 <LD 21.14
19 330 152.58 0.50 198.65 0.094 1.08 <LD 21.95
22 214 130.87 0.46 49.32 0.047 1.95 <LD 17.76
23 590 140.11 0.40 316.25 0.105 4.20 1.38 51.03
25 286 121.19 0.41 90.96 0.069 2.10 <LD 26.78
Avg: 373 108.10 0.52 108.40 0.148 3.90 1.43 136.52
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home