Surface Bottles Sep 2015 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 67.7 14.0 0.80 2.389 2.30 0.171 <LD <LD <LD DNQ 0.035 <LD
02 30.4 3.8 DNQ DNQ <LD 0.112 <LD <LD <LD <LD 0.034 <LD
03A 51.7 11.2 DNQ 0.439 <LD 0.183 <LD <LD <LD <LD 0.060 <LD
03C 65.0 13.2 0.21 0.166 <LD 0.256 <LD <LD <LD <LD 0.093 <LD
05 66.1 10.0 <LD <LD <LD 0.161 <LD <LD <LD <LD 0.060 <LD
05A 34.9 5.2 DNQ <LD <LD 0.093 <LD <LD <LD <LD 0.050 <LD
06 99.6 29.8 1.33 5.874 11.27 0.257 <LD <LD <LD DNQ 0.038 <LD
07 59.7 11.6 DNQ 0.056 <LD 0.185 <LD <LD <LD <LD 0.049 <LD
08A 51.1 9.5 DNQ 0.056 <LD 0.198 <LD <LD <LD <LD 0.056 <LD
09A 37.9 7.8 <LD DNQ <LD 0.140 <LD <LD <LD <LD 0.055 <LD
10A 43.2 9.8 DNQ 0.067 <LD 0.184 <LD <LD <LD <LD 0.061 <LD
11 55.9 9.0 0.46 0.359 <LD 0.212 <LD <LD <LD <LD 0.065 <LD
13A 40.1 9.9 DNQ 0.172 <LD 0.171 <LD <LD <LD <LD 0.056 <LD
14A 30.4 6.9 DNQ 0.358 <LD 0.155 <LD <LD <LD <LD 0.096 <LD
15 30.4 6.5 <LD DNQ <LD 0.088 <LD <LD <LD <LD 0.047 <LD
16 113.8 28.3 1.80 4.534 9.78 0.356 <LD <LD <LD 0.003 0.037 <LD
16A 80.1 18.9 DNQ 2.962 2.33 0.236 <LD <LD <LD <LD 0.045 <LD
17 35.3 9.2 <LD 0.039 <LD 0.123 <LD <LD <LD <LD 0.028 <LD
19 45.9 9.9 0.27 0.092 <LD 0.164 <LD <LD <LD <LD 0.058 <LD
22 41.2 10.1 0.45 DNQ <LD 0.161 <LD <LD <LD <LD 0.070 <LD
23 65.3 16.2 0.44 0.107 <LD 0.270 <LD <LD <LD <LD 0.113 <LD
25 43.6 8.3 0.23 0.094 <LD 0.154 <LD <LD <LD <LD 0.053 <LD
Avg: 54.1 11.8 0.67 1.110 6.42 0.183 0.003 0.057

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 369 21.27 0.42 100.39 0.210 13.67 <LD 358.09
02 154 90.49 0.31 90.60 2.590 1.02 1.40 8.76
03A 338 104.16 0.40 168.13 0.070 2.08 <LD 70.88
03C 415 133.46 0.37 297.53 0.150 2.86 2.04 48.88
05 390 87.89 0.38 121.00 0.020 5.72 1.38 163.17
05A 138 99.17 0.32 6.71 0.060 1.12 <LD 25.66
06 672 acidic[3] 0.92 78.89 0.060 1.86 <LD 860.30
07 214 108.93 0.43 116.70 0.050 1.19 <LD 101.06
08A 259 136.71 0.45 99.26 0.050 1.41 <LD 31.01
09A 161 111.10 0.35 27.08 0.040 5.19 1.42 39.02
10A 271 110.24 0.36 99.74 0.150 2.45 <LD 43.01
11 166 145.39 0.38 79.74 0.010 0.18 <LD 38.14
13A 299 100.47 0.39 147.66 0.070 1.52 <LD 32.67
14A 94 96.35 0.32 2.80 0.030 1.11 <LD 26.30
15 121 75.52 0.35 3.45 0.030 1.54 <LD 53.20
16 446 0.87 1.00 114.62 0.060 2.79 <LD 746.13
16A 420 acidic 0.59 88.09 0.020 2.94 <LD 476.14
17 215 48.39 0.30 98.22 0.050 5.94 <LD 95.07
19 343 130.85 0.42 134.45 0.060 0.85 <LD 33.34
22 206 134.97 0.41 44.30 0.050 4.34 <LD 21.95
23 398 112.19 0.37 231.77 0.060 1.29 <LD 45.47
25 218 113.49 0.35 82.64 0.050 2.41 <LD 32.61
Avg: 287 98.10 0.44 101.53 0.179 2.89 1.56 152.31
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home