Surface Bottles Sep 2014 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 72.3 13.4 0.66 1.723 3.50 0.169 <LD <LD <LD <LD 0.035 <LD
02 32.7 4.7 0.65 0.062 <LD 0.106 <LD <LD <LD <LD 0.079 <LD
03A 52.5 11.7 DNQ 0.235 <LD 0.185 <LD <LD <LD <LD 0.053 <LD
03C 56.1 11.7 DNQ 0.152 <LD 0.210 <LD <LD <LD <LD 0.077 <LD
05 64.1 10.3 <LD DNQ <LD 0.151 <LD <LD <LD <LD 0.052 <LD
05A 33.2 7.4 0.31 0.203 <LD 0.106 <LD <LD <LD <LD 0.052 <LD
06 110.0 35.0 1.39 8.235 13.82 0.275 <LD <LD <LD 0.004 0.033 <LD
07 54.8 11.7 DNQ 0.039 <LD 0.175 <LD <LD <LD <LD 0.043 <LD
08A 51.4 10.0 DNQ 0.116 <LD 0.200 <LD <LD <LD <LD 0.055 <LD
09A 37.9 7.8 DNQ DNQ <LD 0.141 <LD <LD <LD <LD 0.051 <LD
10A 39.7 9.4 DNQ 0.121 <LD 0.171 <LD <LD <LD <LD 0.057 <LD
11 51.6 9.4 0.78 0.735 <LD 0.232 <LD <LD <LD <LD 0.076 <LD
13A 31.2 8.3 0.50 0.485 <LD 0.130 <LD <LD <LD <LD 0.045 <LD
14A 22.4 7.4 0.81 0.116 <LD 0.095 <LD <LD <LD <LD 0.071 <LD
15 34.0 7.3 DNQ 0.096 <LD 0.098 <LD <LD <LD <LD 0.053 <LD
16 118.4 30.4 1.21 4.055 12.73 0.366 <LD <LD <LD 0.003 0.034 <LD
16A 83.4 19.6 <LD 2.672 2.07 0.238 <LD <LD <LD <LD 0.045 <LD
17 23.2 6.4 DNQ 0.154 <LD 0.081 <LD <LD <LD <LD 0.018 <LD
19 44.0 9.8 DNQ 0.082 <LD 0.154 <LD <LD <LD <LD 0.047 <LD
22 39.4 9.9 0.31 0.098 <LD 0.160 <LD <LD <LD <LD 0.061 <LD
23 57.9 14.8 1.09 0.951 <LD 0.242 <LD <LD <LD <LD 0.127 <LD
25 44.4 8.8 0.29 0.175 <LD 0.161 <LD <LD <LD <LD 0.052 <LD
Avg: 52.5 12.1 0.73 1.025 8.03 0.175 0.004 0.055

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 439 31.80 0.43 111.34 0.289 21.71 <LD 319.58
02 144 101.55 0.26 157.02 15.500 1.59 1.22 24.96
03A 318 108.76 0.35 161.67 0.123 1.15 <LD 85.59
03C 506 120.42 0.32 241.15 0.256 2.94 <LD 49.58
05 400 112.36 0.32 115.33 0.092 5.95 <LD 119.35
05A 264 63.60 0.32 94.53 0.077 0.32 <LD 75.07
06 1002 acidic[3] 1.20 61.96 0.077 0.93 <LD 795.97
07 310 118.72 0.31 139.99 0.069 0.66 <LD 60.25
08A 280 151.58 0.44 102.23 0.070 2.16 <LD 33.61
09A 176 116.39 0.28 18.09 0.045 4.98 0.90 45.02
10A 298 112.78 0.30 98.68 0.086 3.92 <LD 30.89
11 216 169.18 0.40 75.02 0.096 0.82 1.00 27.73
13A 223 84.80 0.28 95.85 0.074 1.58 <LD 27.57
14A 194 55.54 0.23 62.78 0.053 1.49 <LD 43.56
15 146 81.41 0.32 3.63 0.047 1.32 0.87 76.84
16 1043 acidic 1.33 165.58 0.086 2.09 0.89 738.57
16A 616 2.12 0.75 108.30 0.139 4.93 <LD 455.23
17 169 67.84 0.36 77.95 0.070 8.36 <LD 19.81
19 263 126.35 0.35 114.27 0.085 1.22 <LD 29.86
22 230 130.38 0.33 54.49 0.057 3.76 <LD 26.67
23 343 110.88 0.30 213.35 0.076 1.76 <LD 46.92
25 260 120.84 0.30 90.05 0.069 1.83 <LD 39.36
Avg: 356 99.36 0.43 107.42 0.797 3.43 0.98 144.18
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home