Surface Bottles Mar 2017 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 103.3 23.0 1.03 3.209 9.48 0.224 <LD <LD <LD 0.002 0.028 <LD
02 30.9 4.5 0.35 0.073 <LD 0.132 <LD <LD <LD DNQ 0.054 <LD
03A 39.6 10.0 0.21 0.938 0.51 0.122 <LD <LD <LD DNQ 0.051 <LD
03C 35.6 8.3 0.25 0.117 <LD 0.130 <LD DNQ <LD <LD 0.068 <LD
05 50.5 8.2 <LD DNQ <LD 0.120 <LD DNQ <LD <LD 0.045 <LD
05A 34.9 4.8 0.27 0.067 DNQ 0.079 <LD <LD <LD <LD 0.049 <LD
06 96.1 35.6 8.87 5.257 23.39 0.217 <LD <LD <LD 0.009 0.030 <LD
07 48.4 9.5 DNQ 0.071 <LD 0.115 <LD <LD <LD <LD 0.040 <LD
08A 26.1 5.5 DNQ 0.060 <LD 0.096 <LD <LD <LD <LD 0.035 <LD
09A 22.4 4.8 DNQ <LD <LD 0.074 <LD <LD <LD <LD 0.035 <LD
10A 16.4 4.4 <LD <LD <LD 0.069 <LD <LD <LD <LD 0.031 <LD
11 26.1 5.1 0.24 0.075 <LD 0.099 <LD <LD <LD <LD 0.040 <LD
13A 14.7 4.5 DNQ 0.066 <LD 0.058 <LD <LD <LD <LD 0.031 <LD
14A 11.5 4.6 <LD <LD <LD 0.047 <LD <LD <LD <LD 0.045 <LD
15 24.7 5.5 <LD DNQ <LD 0.064 <LD <LD <LD <LD 0.036 <LD
16 103.4 33.3 7.72 3.622 21.53 0.364 <LD <LD <LD 0.006 0.026 <LD
16A 91.5 27.6 2.34 3.004 16.02 0.281 <LD <LD <LD 0.002 0.031 <LD
17 20.0 6.0 DNQ 0.067 <LD 0.069 <LD <LD <LD <LD 0.031 <LD
19 24.9 5.9 DNQ 0.069 <LD 0.081 <LD <LD <LD <LD 0.035 <LD
22 19.3 5.4 DNQ 0.051 <LD 0.064 <LD <LD <LD <LD 0.037 <LD
23 58.6 12.7 DNQ 0.094 <LD 0.215 <LD <LD <LD <LD 0.084 <LD
25 26.6 5.3 DNQ 0.046 <LD 0.083 <LD <LD <LD <LD 0.038 <LD
26 35.8 8.3 0.21 0.102 <LD 0.129 <LD <LD <LD <LD 0.063 <LD
Avg: 41.8 10.6 2.15 0.944 14.19 0.127 0.005 0.042

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 641 acidic[3] 0.73 108.33 0.278 26.19 1.39 521.39
02 380 52.73 0.31 332.71 0.804 3.26 <LD 27.58
03A 234 51.01 0.36 97.64 0.054 4.27 <LD 97.62
03C 308 63.26 0.29 188.83 0.070 6.73 <LD 38.83
05 255 56.17 0.35 91.34 0.058 4.49 <LD 119.90
05A 95 80.46 0.37 4.52 0.044 3.64 <LD 33.12
06 812 acidic 1.20 64.35 0.062 2.33 1.39 763.32
07 270 63.26 0.44 88.34 0.047 2.83 <LD 97.61
08A 191 68.21 0.37 79.72 0.057 2.58 <LD 28.99
09A 147 51.44 0.31 14.51 0.039 8.17 <LD 47.82
10A 175 34.24 0.28 75.87 0.048 5.32 <LD 24.00
11 207 72.51 0.32 67.47 0.048 3.52 <LD 23.83
13A 145 29.72 0.27 66.66 0.045 3.77 <LD 28.40
14A 107 17.04 0.30 52.56 0.040 8.19 <LD 34.51
15 122 41.98 0.30 2.48 0.042 2.23 <LD 91.25
16 867 acidic 1.23 146.28 0.064 2.00 <LD 673.18
16A 779 acidic 1.01 16.41 0.108 5.11 <LD 594.24
17 107 24.56 0.25 57.78 0.044 6.34 <LD 44.29
19 200 49.29 0.27 111.99 0.059 1.84 <LD 28.91
22 105 39.61 0.22 39.68 0.044 9.75 <LD 28.56
23 623 85.62 0.27 436.44 0.107 6.73 <LD 52.93
25 117 52.51 0.25 46.65 0.049 2.13 <LD 33.96
26 293 63.69 <LD <LD <LD 1.80 <LD 36.99
Avg: 312 52.49 0.44 99.57 0.101 5.36 1.39 150.92
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home