Surface Bottles Mar 2016 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 71.5 16.0 0.77 2.174 5.86 0.173 <LD <LD <LD <LD 0.049 <LD
02 26.0 4.9 DNQ 0.061 <LD 0.146 <LD <LD <LD <LD 0.046 0.009
03A 39.4 8.8 DNQ 0.622 0.27 0.160 <LD <LD <LD <LD 0.071 <LD
03C 32.5 7.4 DNQ 0.099 <LD 0.112 <LD <LD <LD <LD 0.069 <LD
05 47.6 7.7 <LD DNQ <LD 0.112 <LD <LD <LD <LD 0.055 <LD
05A 33.7 4.5 DNQ 0.057 <LD 0.078 <LD <LD <LD <LD 0.296 <LD
06 87.0 30.2 6.37 4.749 19.95 0.192 <LD <LD <LD DNQ 0.038 <LD
07 44.9 8.5 <LD 0.060 <LD 0.121 <LD <LD <LD <LD 0.059 DNQ
08A 31.6 6.2 DNQ 0.076 <LD 0.110 <LD <LD <LD <LD 0.053 <LD
09A 25.6 5.3 <LD <LD <LD 0.085 <LD <LD <LD <LD 0.064 <LD
10A 18.6 4.9 <LD <LD <LD 0.078 <LD <LD <LD <LD 0.043 <LD
11 34.2 6.2 DNQ 0.079 <LD 0.123 <LD <LD <LD <LD 0.061 <LD
13A 17.4 50.4 DNQ 0.065 <LD 0.067 <LD <LD <LD <LD 0.041 <LD
14A 15.1 5.5 DNQ DNQ <LD 0.058 <LD <LD <LD <LD 0.346 <LD
15 30.2 6.3 <LD DNQ <LD 0.077 <LD <LD <LD <LD 0.050 <LD
16 101.5 28.0 6.92 3.264 18.65 0.336 <LD <LD <LD DNQ 0.039 <LD
16A 79.3 20.8 0.74 2.351 9.45 0.224 <LD <LD <LD <LD 0.043 <LD
17 17.3 5.2 <LD 0.058 <LD 0.063 <LD <LD <LD <LD 0.043 <LD
19 26.0 6.1 DNQ 0.068 <LD 0.089 <LD <LD <LD <LD 0.043 <LD
22 19.0 5.3 DNQ 0.060 <LD 0.063 <LD <LD <LD <LD 0.035 <LD
23 49.0 11.0 DNQ 0.107 <LD 0.188 <LD <LD <LD <LD 0.070 0.005
25 25.1 5.1 DNQ 0.055 <LD 0.082 <LD <LD <LD <LD 0.037 <LD
Avg: 39.7 11.6 3.70 0.824 10.84 0.124 0.075 0.007

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 484 6.51 0.50 89.44 0.176 8.76 <LD 376.59
02 488 47.95 0.36 357.01 1.294 2.04 <LD 29.96
03A 286 64.66 0.47 92.41 0.034 4.80 <LD 79.06
03C 304 55.55 0.35 152.80 0.047 7.73 <LD 39.04
05 296 57.50 0.42 74.10 0.059 4.45 <LD 114.91
05A 89 76.38 0.35 4.19 0.024 3.50 <LD 32.84
06 750 acidic[3] 1.36 45.24 0.053 1.60 <LD 769.09
07 266 62.71 0.55 81.87 0.026 2.05 <LD 92.71
08A 187 65.53 0.42 76.56 0.034 2.75 <LD 29.80
09A 128 50.77 0.37 13.08 <LD 9.38 <LD 45.86
10A 235 33.85 0.35 72.13 <LD 6.86 <LD 28.67
11 258 73.99 0.41 89.78 0.028 3.79 1.31 27.69
13A 253 27.77 0.33 67.74 0.034 3.39 <LD 30.99
14A 97 16.27 0.32 57.47 <LD 7.24 <LD 36.45
15 211 42.96 0.42 2.47 <LD 2.85 <LD 89.74
16 805 acidic 1.61 136.85 0.040 3.04 <LD 781.75
16A 499 acidic 1.21 140.89 0.087 4.77 <LD 577.71
17 160 20.61 0.34 73.28 0.029 8.04 <LD 44.14
19 233 47.30 0.39 100.35 0.038 3.35 <LD 29.49
22 141 37.97 0.33 29.27 0.027 11.79 <LD 29.54
23 555 81.80 0.39 383.87 0.071 8.28 <LD 52.94
25 157 50.99 0.35 38.28 0.029 3.42 <LD 34.80
Avg: 313 48.48 0.53 99.05 0.118 5.18 1.31 153.35
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home