Surface Bottles Mar 2014 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 71.8 15.9 0.72 2.130 0.170 <LD <LD <LD 0.002 0.028 <LD
02 52.5 6.6 0.26 0.094 0.194 <LD <LD <LD DNQ 0.050 <LD
03A 43.2 11.1 0.22 1.355 0.131 <LD <LD <LD DNQ 0.044 <LD
03C 40.2 8.8 0.29 0.110 0.151 <LD <LD <LD DNQ 0.060 <LD
05 42.9 6.8 0.31 0.518 0.102 <LD <LD <LD DNQ 0.049 <LD
05A 27.5 3.6 0.43 0.087 0.062 <LD <LD <LD DNQ 0.049 <LD
06 87.1 30.9 8.25 4.750 0.201 <LD <LD <LD 0.009 0.026 <LD
07 44.8 8.9 DNQ 0.151 0.122 <LD <LD <LD DNQ 0.037 <LD
08A 34.1 6.7 DNQ DNQ 0.119 <LD <LD <LD DNQ 0.043 <LD
09A 29.2 6.0 <LD <LD 0.099 <LD <LD <LD DNQ 0.035 <LD
10A 23.1 5.9 <LD <LD 0.100 <LD <LD <LD DNQ 0.033 <LD
11 29.0 5.6 0.24 0.062 0.107 <LD <LD <LD DNQ 0.043 <LD
13 21.5 5.6 DNQ 0.089 0.081 <LD <LD <LD DNQ 0.039 <LD
13A 14.4 4.1 0.72 0.159 0.053 <LD <LD <LD DNQ 0.042 <LD
14A 20.2 6.6 DNQ DNQ 0.078 <LD <LD <LD DNQ 0.063 <LD
15 37.2 8.2 <LD <LD 0.095 <LD <LD <LD <LD 0.041 <LD
16 81.8 18.8 3.48 2.289 0.255 <LD <LD <LD 0.004 0.034 <LD
16A 88.7 23.7 2.53 3.181 0.262 <LD <LD <LD 0.004 0.031 <LD
17 19.5 5.7 <LD 0.050 0.064 <LD <LD <LD DNQ 0.032 <LD
19 31.4 6.6 DNQ 0.094 0.104 <LD <LD <LD DNQ 0.046 <LD
22 22.1 5.8 DNQ 0.052 0.079 <LD <LD <LD DNQ 0.030 <LD
23 65.0 13.6 DNQ 0.150 0.245 <LD <LD <LD <LD 0.078 <LD
25 28.2 5.7 <LD 0.046 0.093 <LD <LD <LD <LD 0.035 <LD
Avg: 41.5 9.6 1.59 0.854 0.129 0.005 0.042

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 512 10.55 0.39 122.19 0.196 12.88 1.04 369.80
02 816 70.69 0.28 854.47 5.380 2.69 1.32 39.07
03A 324 52.75 0.34 115.25 0.051 3.50 <LD 139.61
03C 361 63.93 0.26 242.20 0.076 10.25 <LD 44.50
05 285 42.62 0.29 112.56 0.042 6.72 1.00 108.47
05A 116 59.92 0.24 5.28 0.037 6.35 <LD 32.54
06 770 acidic[3] 1.13 58.44 0.044 1.13 <LD 840.54
07 280 47.48 0.42 98.08 <LD 2.64 0.98 117.17
08A 203 58.45 0.28 122.58 0.045 4.30 1.01 29.31
09A 144 59.92 0.27 14.47 0.031 7.47 1.01 55.86
10A 196 43.68 0.26 95.96 0.059 5.03 <LD 31.98
11 201 58.45 0.27 92.71 0.040 4.76 1.00 25.44
13 145 31.65 0.25 118.77 0.047 4.34 <LD 31.58
13A 132 23.21 0.22 60.26 0.032 4.57 <LD 29.44
14A 209 19.62 0.22 109.49 0.046 7.70 <LD 38.20
15 184 46.42 0.30 2.90 0.032 2.86 <LD 103.86
16 385 1.27 0.78 190.12 0.047 4.12 1.02 433.98
16A 697 acidic 1.04 148.22 0.090 4.84 <LD 563.91
17 133 21.10 0.26 66.90 0.035 7.00 <LD 51.01
19 278 50.22 0.26 157.75 0.055 5.55 <LD 30.25
22 145 37.56 0.24 35.58 0.031 7.35 <LD 31.62
23 712 90.73 0.28 612.43 0.130 6.44 <LD 58.85
25 133 63.30 0.26 46.46 0.038 3.41 <LD 39.63
Avg: 320 45.41 0.37 151.44 0.299 5.47 1.05 141.16
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home