Surface Bottles Jun 2017 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 78.7 17.2 1.09 2.416 7.864 0.380 <LD DNQ <LD DNQ 0.030 <LD
02 24.3 3.1 0.45 0.129 DNQ 0.150 <LD DNQ <LD <LD 0.041 <LD
03A 26.6 6.1 0.46 0.613 0.536 0.161 <LD <LD <LD <LD 0.037 <LD
03C 25.2 5.5 0.45 0.109 DNQ 0.171 <LD <LD <LD <LD 0.046 <LD
05 44.0 6.7 DNQ 0.079 DNQ 0.229 <LD DNQ <LD <LD 0.048 <LD
05A 30.6 3.9 0.32 0.098 DNQ 0.139 <LD DNQ <LD <LD 0.049 <LD
06 61.7 17.8 2.36 2.692 7.998 0.313 <LD <LD <LD 0.003 0.036 <LD
07 36.9 6.9 DNQ 0.114 <LD 0.206 <LD DNQ <LD <LD 0.037 <LD
08A 24.1 4.5 0.26 0.082 DNQ 0.167 <LD DNQ <LD <LD 0.035 <LD
09A 22.4 4.4 0.23 0.114 DNQ 0.176 <LD <LD <LD <LD 0.043 <LD
10A 14.8 3.6 0.26 0.079 DNQ 0.118 <LD 0.049 <LD <LD 0.035 <LD
11 26.9 4.5 DNQ 0.077 DNQ 0.185 <LD <LD <LD <LD 0.037 <LD
13A 13.4 3.8 0.24 0.117 <LD 0.104 <LD <LD <LD <LD 0.029 <LD
14A 13.0 4.9 0.23 0.053 DNQ 0.098 <LD <LD <LD <LD 0.055 <LD
16 75.4 21.8 6.48 2.649 14.820 0.500 <LD <LD <LD 0.005 0.032 <LD
16A 51.1 11.4 0.34 1.389 0.249 0.316 <LD <LD <LD <LD 0.033 <LD
17 17.0 4.9 0.35 0.317 <LD 0.120 <LD <LD <LD <LD 0.033 <LD
19 22.9 4.8 0.25 0.110 <LD 0.153 <LD <LD <LD <LD 0.032 <LD
22 19.4 5.2 2.25 0.497 0.554 0.133 <LD <LD <LD <LD 0.062 <LD
23 35.4 7.8 DNQ 0.077 <LD 0.255 <LD <LD <LD <LD 0.013 <LD
25 20.0 3.8 0.29 0.092 <LD 0.127 <LD <LD <LD <LD 0.012 <LD
26 24.7 5.7 0.40 0.104 DNQ 0.171 <LD DNQ <LD <LD 0.012 <LD
Avg: 32.2 7.2 0.93 0.546 5.34 0.199 0.049 0.004 0.036

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 547 3.80 0.60 73.06 0.249 16.10 2.84 415.71
02 116 66.80 0.51 40.57 0.574 1.42 <LD 12.36
03A 144 44.65 0.59 23.15 0.043 4.60 <LD 63.95
03C 161 59.27 0.60 60.41 0.113 9.97 2.82 31.66
05 235 59.27 0.59 56.54 0.061 9.98 <LD 109.98
05A 92 68.52 0.57 3.38 0.039 2.49 <LD 23.19
06 452 acidic[3] 0.92 45.43 0.058 1.89 2.84 358.80
07 176 62.50 0.62 42.57 0.042 2.03 <LD 67.08
08A 111 56.91 0.58 35.27 0.046 3.50 <LD 23.55
09A 99 45.30 0.50 7.29 <LD 11.30 <LD 33.97
10A 89 33.04 0.55 24.06 0.051 7.83 <LD 23.30
11 126 74.32 0.59 29.74 0.046 3.75 <LD 21.32
13A 90 30.68 0.50 31.86 0.043 3.93 <LD 25.27
14A 107 21.00 0.49 42.86 0.044 9.15 <LD 36.36
16 704 acidic 1.46 68.69 0.059 2.68 3.06 569.17
16A 325 14.12 0.52 45.68 0.063 3.62 2.85 257.71
17 128 31.97 0.57 38.26 0.047 23.23 <LD 25.92
19 140 58.84 0.56 61.94 0.050 4.59 2.82 25.30
22 97 42.93 0.56 22.11 0.043 12.58 <LD 25.06
23 285 85.93 0.59 111.68 0.067 13.14 2.83 45.07
25 103 45.30 0.61 22.81 0.047 4.82 2.82 26.66
26 159 57.77 0.54 55.56 0.053 10.09 <LD 33.11
Avg: 204 48.15 0.62 42.86 0.088 7.40 2.86 102.48
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home