Surface Bottles Jun 2016 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 100.3 20.5 1.05 3.104 4.35 0.233 <LD <LD <LD 0.023 0.095 <LD
02 32.5 4.4 0.28 DNQ <LD 0.131 <LD <LD <LD <LD 0.076 <LD
03A 44.3 9.8 0.33 0.368 DNQ 0.144 <LD <LD <LD <LD 0.097 <LD
03C 44.0 9.3 0.67 0.153 DNQ 0.153 <LD <LD <LD <LD 0.114 <LD
05 67.0 10.4 0.42 0.106 0.24 0.158 <LD <LD <LD <LD 0.090 <LD
05A 43.2 6.0 0.67 0.176 0.37 0.103 <LD <LD <LD <LD 0.083 <LD
06 93.4 28.1 1.35 4.702 12.68 0.222 <LD <LD <LD 0.021 0.035 <LD
07 58.8 11.3 0.27 0.136 <LD 0.164 <LD <LD <LD <LD 0.041 <LD
08A 47.2 9.0 0.38 0.153 <LD 0.171 <LD <LD <LD <LD 0.052 <LD
09A 37.6 7.6 0.57 0.118 0.23 0.132 <LD <LD <LD <LD 0.053 <LD
10A 25.7 6.4 0.35 0.048 DNQ 0.106 <LD <LD <LD <LD 0.025 <LD
11 47.0 8.3 0.37 0.152 <LD 0.181 <LD <LD <LD <LD 0.045 <LD
13A 24.3 6.7 0.33 0.117 <LD 0.096 <LD <LD <LD <LD 0.017 <LD
14A 18.4 6.5 0.14 DNQ <LD 0.071 <LD <LD <LD <LD 0.037 <LD
15 33.9 7.3 <LD 0.028 <LD 0.090 <LD <LD <LD <LD 0.025 <LD
16 104.8 25.6 2.54 3.673 9.14 0.328 <LD <LD <LD <LD 0.025 <LD
16A 73.8 17.3 <LD 2.265 1.32 0.213 <LD <LD <LD <LD 0.027 <LD
17 24.5 7.0 0.35 0.731 <LD 0.083 <LD <LD <LD <LD 0.026 <LD
19 36.4 8.0 0.42 0.186 DNQ 0.127 <LD <LD <LD <LD 0.064 <LD
22 25.9 6.9 0.37 0.067 <LD 0.093 <LD <LD <LD <LD 0.059 <LD
23 48.1 10.2 DNQ 0.149 <LD 0.185 <LD <LD <LD <LD 0.084 0.062
25 29.8 5.9 0.38 0.083 <LD 0.100 <LD <LD <LD <LD 0.052 <LD
Avg: 48.2 10.6 0.59 0.826 4.05 0.149 0.022 0.056 0.062

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 812 21.92 0.50 97.25 0.381 15.25 <LD 438.58
02 280 83.11 0.32 123.59 1.054 1.24 1.49 12.11
03A 326 88.32 0.38 102.67 0.062 5.09 <LD 62.96
03C 324 93.53 0.35 149.78 0.070 6.33 <LD 34.47
05 369 92.45 0.40 99.82 0.062 5.30 1.49 141.72
05A 146 109.81 0.35 4.73 0.037 2.18 1.47 24.90
06 788 acidic[3] 0.90 58.77 0.077 1.41 <LD 562.85
07 347 95.27 0.51 90.92 0.050 1.62 <LD 111.15
08A 276 121.52 0.42 109.15 0.060 3.47 1.49 26.35
09A 234 99.39 0.38 24.60 0.040 6.42 1.60 46.09
10A 243 68.58 0.35 66.94 0.050 6.02 1.48 22.26
11 321 127.38 0.36 81.55 0.056 2.95 <LD 23.68
13A 222 60.33 0.34 80.77 0.051 2.83 <LD 26.66
14A 180 34.29 0.31 67.76 0.040 3.76 <LD 37.57
15 159 55.77 0.37 2.53 0.029 1.84 <LD 90.90
16 851 acidic 1.00 131.66 0.068 2.58 <LD 617.81
16A 576 acidic 0.63 95.58 0.092 3.56 <LD 414.05
17 223 73.57 0.44 85.82 0.060 9.47 <LD 13.13
19 351 103.73 0.38 182.03 0.073 3.67 <LD 28.35
22 189 79.64 0.33 41.23 0.039 10.38 <LD 22.82
23 460 120.22 0.36 251.91 0.085 7.73 <LD 47.20
25 200 85.94 0.34 49.15 0.050 3.66 <LD 30.37
Avg: 358 76.65 0.44 90.83 0.118 4.85 1.50 128.91
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home