Surface Bottles Jun 2014 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 75.6 16.0 0.91 2.189 5.50 0.177 <LD <LD <LD 0.002 0.030 <LD
02 24.9 6.2 0.53 0.044 <LD 0.104 <LD <LD <LD <LD 0.069 <LD
03A 34.3 7.6 0.63 0.811 <LD 0.112 <LD <LD <LD <LD 0.061 <LD
03C 43.8 9.0 0.71 0.157 <LD 0.163 <LD <LD <LD <LD 0.067 <LD
05 56.6 8.9 0.47 0.101 <LD 0.134 <LD <LD <LD <LD 0.055 <LD
05A 38.9 5.7 2.53 0.195 1.50 0.096 <LD <LD <LD 0.003 0.071 <LD
06 95.0 32.0 3.86 6.424 17.59 0.237 <LD <LD <LD 0.006 0.032 <LD
07 53.5 10.8 DNQ 0.089 <LD 0.161 <LD <LD <LD <LD 0.040 <LD
08A 38.0 7.5 0.63 0.126 <LD 0.139 <LD <LD <LD <LD 0.047 <LD
09A 35.2 7.0 0.44 0.080 <LD 0.114 <LD <LD <LD <LD 0.053 <LD
10A 27.3 6.8 0.28 0.049 <LD 0.118 <LD <LD <LD <LD 0.045 <LD
11 41.5 7.8 0.34 0.183 <LD 0.174 <LD <LD <LD <LD 0.052 <LD
13A 20.5 5.9 0.38 0.093 <LD 0.081 <LD <LD <LD <LD 0.032 <LD
14A 17.3 6.5 0.61 0.057 <LD 0.067 <LD <LD <LD <LD 0.057 <LD
15 37.2 7.9 DNQ 0.049 <LD 0.101 <LD <LD <LD <LD 0.048 <LD
16 112.5 28.7 3.18 3.959 13.09 0.358 <LD <LD <LD 0.004 0.033 <LD
16A 81.5 18.8 0.15 2.775 2.55 0.241 <LD <LD <LD <LD 0.044 <LD
17 28.8 8.0 0.39 0.706 <LD 0.099 <LD <LD <LD <LD 0.024 <LD
19 31.8 7.0 0.50 0.127 <LD 0.108 <LD <LD <LD <LD 0.042 <LD
22 28.8 7.3 DNQ DNQ <LD 0.105 <LD <LD <LD <LD 0.038 <LD
23 57.5 11.8 <LD 0.040 <LD 0.222 <LD <LD <LD <LD 0.065 <LD
25 37.5 7.4 0.32 0.085 <LD 0.131 <LD <LD <LD <LD 0.046 <LD
Avg: 46.3 10.7 0.94 0.873 8.05 0.147 0.004 0.048

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 494 18.78 0.43 98.78 0.220 17.07 <LD 380.51
02 257 52.75 0.26 156.17 0.951 3.34 1.14 31.39
03A 311 67.10 0.34 90.08 0.055 2.75 1.13 65.81
03C 328 100.65 0.31 159.73 0.140 11.65 1.14 39.39
05 254 92.21 0.35 89.72 0.063 6.08 1.14 116.72
05A 138 108.67 0.32 4.94 0.051 2.63 <LD 28.60
06 780 acidic[3] 1.14 51.31 0.037 0.91 1.15 848.55
07 313 93.47 0.43 93.14 0.050 1.21 <LD 99.46
08A 199 97.48 0.34 73.22 0.036 3.32 <LD 29.23
09A 191 90.73 0.32 15.86 0.032 7.97 <LD 47.99
10A 167 71.11 0.32 68.04 0.054 7.09 <LD 26.79
11 240 112.25 0.27 72.17 0.037 2.85 <LD 28.54
13A 251 49.59 0.26 60.46 0.037 3.05 <LD 28.84
14A 173 32.23 0.24 60.55 0.028 6.32 <LD 40.79
15 131 65.41 0.34 2.92 0.037 2.44 1.13 96.11
16 815 acidic 1.18 146.89 0.065 2.24 <LD 671.03
16A 582 1.27 0.61 99.11 0.088 3.31 <LD 450.75
17 149 85.67 0.45 74.54 0.077 6.76 <LD 12.08
19 195 81.24 0.30 80.91 0.041 4.40 <LD 27.47
22 49 72.80 0.28 43.56 0.033 12.60 <LD 26.78
23 786 114.57 0.32 292.21 0.081 9.85 <LD 48.19
25 179 91.79 0.30 61.70 0.049 4.60 1.12 34.49
Avg: 317 74.99 0.41 86.18 0.103 5.57 1.14 144.52
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home