Surface Bottles Jun 2011 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 86.3 19.6 2.45 0.103 0.208 <LD <LD <LD <LD 0.022 <LD
02 30.0 0.1 0.69 0.102 0.096 <LD <LD <LD <LD 0.033 <LD
03 37.5 8.8 0.65 0.069 0.125 <LD <LD <LD <LD 0.046 <LD
03A 26.6 6.2 0.74 0.590 0.082 <LD <LD <LD <LD 0.037 <LD
03C
04 45.7 10.0 0.66 2.328 0.124 <LD <LD <LD <LD 0.030 <LD
05 49.2 7.9 <LD DNQ 0.116 <LD <LD <LD <LD 0.035 <LD
05A 35.9 4.9 1.02 0.067 0.080 <LD <LD <LD <LD 0.041 <LD
06 90.3 5.6 12.91 6.295 0.206 <LD <LD <LD <LD 0.013 <LD
07 48.9 7.6 DNQ DNQ 0.142 <LD <LD <LD <LD 0.025 <LD
08 34.9 7.5 <LD 0.062 0.132 <LD <LD <LD <LD 0.033 <LD
08A 41.0 8.0 DNQ 0.097 0.153 <LD <LD <LD <LD 0.040 <LD
09 31.5 6.7 0.28 0.084 0.106 <LD <LD <LD <LD 0.042 <LD
09A 30.9 6.9 0.30 0.086 0.105 <LD <LD <LD <LD 0.039 <LD
10 20.2 5.6 0.44 0.086 0.083 <LD <LD <LD <LD 0.034 <LD
10A 23.8 5.8 DNQ 0.070 0.108 <LD <LD <LD <LD 0.035 <LD
11 42.6 7.7 0.48 0.122 0.168 <LD <LD <LD <LD 0.049 <LD
13 24.0 7.3 DNQ 0.080 0.094 <LD <LD <LD <LD 0.030 <LD
13A 24.3 6.7 DNQ 0.158 0.095 <LD <LD <LD <LD 0.032 <LD
14 16.5 5.6 DNQ 0.042 0.062 <LD <LD <LD <LD 0.047 <LD
14A 19.9 5.9 0.45 0.066 0.094 <LD <LD <LD <LD 0.062 <LD
15 28.7 6.8 0.94 0.277 0.075 <LD <LD <LD <LD 0.048 <LD
16 111.3 3.9 11.16 4.733 0.383 <LD <LD <LD <LD 0.015 <LD
16A 88.3 3.8 1.97 3.949 0.278 <LD <LD <LD <LD 0.027 <LD
17 24.1 7.1 0.50 0.275 0.080 <LD <LD <LD <LD 0.025 <LD
18 26.8 7.9 0.25 0.081 0.104 <LD <LD <LD <LD 0.045 <LD
19 40.3 8.9 0.24 0.150 0.131 <LD <LD <LD <LD 0.036 <LD
21 24.5 6.1 0.43 0.076 0.086 <LD <LD <LD <LD 0.033 <LD
22 21.9 5.8 DNQ 0.040 0.062 <LD <LD <LD <LD 0.022 <LD
23 61.4 9.0 0.25 0.123 0.216 <LD <LD <LD <LD 0.060 <LD
24 75.9 7.8 DNQ 0.045 0.226 <LD <LD <LD <LD 0.052 <LD
25 30.8 6.0 DNQ 0.074 0.095 <LD <LD <LD <LD 0.032 <LD
Avg: 41.7 7.0 1.84 0.701 0.133 0.036

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 741 acidic[3] 0.14 67.74 0.704 10.10 0.41 431.44
02 223 68.69 0.14 60.35 3.801 4.18 0.42 19.62
03 309 93.05 0.18 72.39 0.426 4.70 <LD 33.36
03A 217 73.01 0.07 27.08 0.932 2.09 <LD 34.50
03C
04 119 34.96 0.08 17.46 0.478 3.11 0.31 149.07
05 239 78.41 0.10 42.35 0.474 4.28 <LD 93.38
05A 133 94.61 0.13 3.03 0.827 1.64 <LD 25.44
06 1123 acidic 0.22 0.72 0.245 0.46 0.31 56.55
07 359 79.71 0.08 46.36 0.421 1.78 0.28 96.69
08 77 108.11 0.11 26.48 0.481 3.02 0.33 20.95
08A 197 105.21 0.10 49.25 0.418 4.55 0.29 21.69
09 243 72.87 0.08 6.55 0.600 11.66 0.36 36.71
09A 211 61.47 0.10 6.84 0.552 8.93 0.31 33.15
10 187 46.01 0.08 36.86 0.508 3.40 0.30 19.29
10A 231 73.01 0.01 33.55 0.661 4.74 <LD 20.11
11 258 112.86 0.05 41.82 0.466 2.83 0.32 18.75
13 268 67.45 0.06 50.41 0.647 2.81 <LD 93.58
13A 219 62.21 0.17 50.77 0.676 2.85 <LD 21.19
14 193 51.41 0.11 30.57 0.448 2.29 0.26 25.40
14A 143 56.81 0.26 1.08 0.238 0.50 <LD 1.95
15 72 62.21 0.13 2.30 0.623 2.42 0.29 55.09
16 1190 acidic 0.32 75.89 0.381 1.97 <LD 709.48
16A 875 acidic 0.27 57.07 0.379 3.86 <LD 508.48
17 168 73.91 0.11 33.64 0.471 4.77 <LD 21.35
18 223 39.81 0.10 42.88 0.579 2.67 <LD 45.50
19 260 100.01 0.13 65.14 0.885 4.46 0.29 20.41
21 175 67.61 0.05 25.17 0.520 5.58 <LD 22.59
22 141 81.89 0.14 9.36 0.635 8.75 <LD 25.29
23 567 55.96 0.18 206.64 0.942 5.34 0.30 41.27
24 547 116.21 0.13 67.02 0.455 4.81 0.33 125.13
25 226 51.41 0.19 41.61 0.504 2.63 0.27 25.77
Avg: 327 73.66 0.13 41.88 0.657 4.10 0.32 92.04
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home