Surface Bottles Dec 2015 Lab Data

From Beaver Run Project
Jump to: navigation, search

See How To Read A Lab Analysis Report for more detailed information about the tables below.

Metal Concentrations

The following samples were analyzed for various metals. All results below are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
01 76.3 15.3 0.75 2.144 3.72 0.176 <LD <LD <LD DNQ 0.036 <LD
02 30.2 3.9 <LD <LD <LD 0.090 <LD <LD <LD <LD 0.039 <LD
03A 45.5 10.1 <LD 0.502 DNQ 0.153 <LD <LD <LD <LD 0.050 <LD
03C 44.4 9.8 0.46 0.116 <LD 0.156 <LD <LD <LD <LD 0.065 <LD
05 59.8 10.1 <LD <LD <LD 0.141 <LD <LD <LD <LD 0.048 <LD
05A 41.0 5.7 <LD <LD <LD 0.094 <LD <LD <LD <LD 0.051 <LD
06 98.2 27.3 0.47 4.505 8.30 0.235 <LD <LD <LD <LD 0.038 <LD
07 50.5 10.3 <LD 0.078 <LD 0.144 <LD <LD <LD <LD 0.038 <LD
08A 43.3 8.6 <LD 0.115 <LD 0.162 <LD <LD <LD <LD 0.042 <LD
09A 33.3 7.0 <LD <LD <LD 0.117 <LD <LD <LD <LD 0.043 <LD
10A 23.1 6.2 <LD <LD <LD 0.098 <LD <LD <LD <LD 0.037 <LD
11 43.0 7.7 0.24 0.281 <LD 0.164 <LD <LD <LD <LD 0.050 <LD
13A 23.5 6.7 <LD 0.139 <LD 0.095 <LD <LD <LD <LD 0.032 <LD
14A 17.8 6.4 <LD <LD <LD 0.068 <LD <LD <LD <LD 0.055 <LD
15 37.6 8.4 <LD <LD <LD 0.098 <LD <LD <LD <LD 0.046 <LD
16 113.6 30.0 4.16 3.934 13.84 0.336 <LD <LD <LD DNQ 0.029 <LD
16A 81.4 19.7 0.47 2.570 1.90 0.225 <LD <LD <LD <LD 0.033 <LD
17 19.4 6.0 <LD 0.074 <LD 0.070 <LD <LD <LD <LD 0.034 <LD
19 33.0 7.8 <LD 0.134 <LD 0.112 <LD <LD <LD <LD 0.035 <LD
22 28.0 7.4 <LD 0.062 <LD 0.101 <LD <LD <LD <LD 0.033 <LD
23 35.2 9.3 0.31 0.119 <LD 0.134 <LD <LD <LD <LD 0.055 <LD
25 33.2 7.1 <LD 0.370 <LD 0.116 <LD <LD <LD <LD 0.034 <LD
Avg: 46.0 10.5 0.98 1.010 6.94 0.140 0.042

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable buy not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Site TDS Alk.[2] F- Cl- Br- NO3- PO43- SO42-
01 414 27.13 0.50 91.07 0.200 16.79 <LD 362.09
02 223 79.21 0.39 73.73 1.728 2.10 1.21 23.00
03A 240 86.80 0.44 86.56 0.055 3.40 <LD 75.26
03C 262 87.45 0.39 154.23 0.063 5.39 1.20 40.62
05 272 76.38 0.43 78.18 0.053 4.66 <LD 140.95
05A 146 101.34 0.36 6.21 0.034 2.73 <LD 35.94
06 653 1.08 1.04 70.68 0.049 1.51 <LD 624.77
07 214 80.51 0.54 71.77 0.033 1.40 <LD 95.79
08A 183 102.64 0.47 75.13 0.044 2.19 <LD 31.51
09A 74 76.38 0.39 13.37 0.029 9.13 1.23 49.42
10A 69 53.17 0.37 50.86 0.043 6.14 <LD 29.47
11 49 100.91 0.39 63.01 0.038 3.97 <LD 30.23
13A 152 51.43 0.36 65.79 0.055 2.62 <LD 31.00
14A 100 31.03 0.33 48.31 0.027 3.92 <LD 40.66
15 180 56.42 0.51 3.06 <LD 1.95 <LD 107.26
16 626 acidic[3] 1.50 99.23 0.051 3.16 <LD 800.99
16A 448 2.82 0.78 82.57 0.091 5.40 <LD 365.45
17 88 29.95 0.33 68.06 0.031 7.42 <LD 43.43
19 159 78.12 0.40 83.26 0.050 4.83 <LD 32.93
22 37 69.01 0.36 41.92 0.030 10.21 <LD 28.85
23 104 74.00 0.36 87.58 0.038 6.34 <LD 38.03
25 58 79.86 0.37 49.49 0.037 2.53 <LD 36.87
Avg: 216 64.08 0.50 66.55 0.132 4.90 1.21 139.30
See the field data report for these samples.

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.
  3. Samples labeled "acidic" for the alkalinity test were already at a pH 4.5 and could not be titrated.



HomeLab DataField Data Home