Site 08

From Beaver Run Project
Jump to: navigation, search

This is a summary report of all field data and lab results for surface bottle site 08.

See How To Read A Field Data Report and/or How To Read A Lab Analysis Report for more detailed information about the tables below.

Field Data Summary Report

Below is a field data summary report for this site, including the average and standard deviation values for each measured parameter. Collector initials are explained here.

Date Collector Time pH TDS (ppm) Cond. (µS) Temp. (C°) Comments
2011/06 NF 9:37 7.99 170 343 13.8 none
2011/09 RC 9:58 8.04 171 343 20.5 moderate flow
Average values 8.02 170 343 17.1

Metal Concentrations

The following samples were analyzed for various metals. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Date Ca Mg Fe Mn Al[1] Sr Pb As Hg Cr Ba Cd
2011/06 34.9 7.5 <LD 0.062 0.132 <LD <LD <LD <LD 0.033 <LD
2011/09 35.9 7.8 <LD 0.058 0.132 <LD <LD <LD <LD 0.035 <LD
Avg. ± std.dev. 35 8 0.1 0.132 0.034

TDS, Alkalinity, and Salt Concentrations

The following samples were analyzed for total dissolved solids (TDS), alkalinity, and various [[Salts Analysis|anionic salts. All results are reported in units of parts per million (ppm). Any result that was below the instrument detection limit is designated by '<LD', and any result that was detectable but not quantifiable (e.g., lower than the limit of quantitation) is designated by 'DNQ'.

Date TDS Alk.[2] F Cl Br NO3 PO4 SO4
2011/06 77 108.11 0.11 26.48 0.481 3.02 0.33 20.95
2011/09 201 102.37 0.11 28.01 0.328 5.76 0.44 16.89
Avg. ± std.dev. 139 105 0.11 27 0.40 4.4 0.39 19

Notes

  1. Samples were not analyzed for aluminum prior to June 2014.
  2. Alkalinity is reported as ppm CaCO3 equivalents.



HomeQuarterly Field ReportsQuarterly Lab ReportsBottle Sites